[Healeys] 100 bolts for clutch cover

[Rich C]

Thomas,

Sorry to take so long answering, I had to do some digging and measuring.
According to the Spare parts List, these bolts holding the clutch assembly 
to flywheel are Part number 2K 5881 with lockwashers 2K 5319. These are part 
numbers not numbered by the standard BMC fastener number coding system, 
therefore they are specific to this use.
I measured some originals and they are 5/16" BSF thread shouldered black 
phosphate hex head capscrews by about 11/16" long (measurement taken from 
under the heads). A 5/16" BSF thread measures 5/16" diameter but has a 
thread pitch of 22 T.P.I. therefore cannot be substituted by SAE threaded 
fasteners. DON'T lose any more! <grin>

Now speaking of "can't find", I don't seem to have any record of you or your 
car on the Hundred Registry. Would you please be so kind as to send me all 
your appropriate numbers and car information, etc. so we can add you and 
your BN2 to the Registry?

Thanks

Rich Chrysler
AHCA Hundred Registrar

----- Original Message ----- 
From: "Thomas-Michael Willig" <twillig at ruda.de>
To: <healeys at autox.team.net>
Sent: Wednesday, February 04, 2009 9:18 AM
Subject: [Healeys] 100 bolts for clutch cover


> During the rebuild of my BN2 engine,  I managed to lose the bolts which
> attach the clutch cover to the flywheel. Anyone knows which size/thread
> these bolts should have?? Somehow, none of the available bolts do fit.
>
> Thanks for any help here.
>
> Regards
>
>
> Thomas Willig
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler at quickclic.net
>
> http://www.team.net/archive