[Healeys] (no subject)

[Rich C]

Tim,

The inverted metal lip should be covered with the matching vinyl as the trim 
panels. The rear floor carpet will indeed be pushed tightly up under the 
flange, and will be hed there by the compression of the carpet, being forced 
to stay there by the floor snaps. Pictures included.

Rich Chrysler

----- Original Message ----- 
From: <tld6008 at mchsi.com>
To: "Healey list" <healeys at autox.team.net>
Sent: Wednesday, February 04, 2009 8:56 PM
Subject: [Healeys] (no subject)


> I am trying to finish the interior of my BN7 and am unsure how to deal 
> with the horizontal feature that is just above the drive shaft tunnel on 
> the vertical bulkhead behind the seats.  I believe the Armacord from the 
> floor fits up underneath it  and the carpet on the rear deck runs down to 
> it but what actually is done with the  what ever it's called.
>
> --
> Tim Davis BN7
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler at quickclic.net
>
> http://www.team.net/archive

[demime 1.01d removed an attachment of type image/jpeg which had a name of 3000 Rdstr Detail 0002.JPG]

[demime 1.01d removed an attachment of type image/jpeg which had a name of P1010068.JPG]

[demime 1.01d removed an attachment of type image/jpeg which had a name of P1010067.JPG]