[Healeys] wood block stands

[Alex]

Norman, I use the blocks in conjunction with my hydraulic jack and multiple 
jack stands.

== Alex in Maine
     "The Blue Mainie," 1960 Austin Healey 3000 BT7
     "Conkling," 1946 MG TC #1321
     Former owner 1957 A-H 100-6, 1967 A-H BJ8,
     1965 MG Midget
     http://home.roadrunner.com/~alexmm


----- Original Message ----- 
From: Norman Nock
To: healeys at autox.team.net
Cc: Alex
Sent: Saturday, December 05, 2009 2:04 PM
Subject: wood block stands


 You forget the car is in gear and you crank the engine , your car will be 
off those
wood blocks VERY quick ... now you have a big problem . Norman Nock

--- On Sat, 12/5/09, Alex <alexmm at roadrunner.com> wrote:


From: Alex <alexmm at roadrunner.com>
Subject: Re: [Healeys] Harbor Freight Jacks
To: "Pieter and Linda" <pieters at pt.lu>, "Mark LaPierre" 
<lapierrem at sbcglobal.net>
Cc: "Steve Gerow" <steveg at abrazosdata.com>, healeys at autox.team.net
Date: Saturday, December 5, 2009, 6:14 AM


Solid hardwood blocks are also useful to ensure safety. They can often be
obtained from boatyards. Mine are about 2-ft long and 10 inches square.
It's easy to place them at strategic points.

== Alex in Maine


[demime found a multipart/alternative section which it tried
to parse but could not find any section which it could render. Please send plain text.]