[Healeys] finish of gauge housing

[Walt Peterson]

Tain't paint: Donald was able to recycle his old teabags for the mix...
 
Walt

--- On Tue, 12/1/09, Bob Spidell <bspidell at comcast.net> wrote:


From: Bob Spidell <bspidell at comcast.net>
Subject: Re: [Healeys] finish of gauge housing
To: "Rich C" <richchrysler at quickclic.net>
Cc: "'Healeys List'" <healeys at autox.team.net>,
eric.frenken at brits-n-pieces.com
Date: Tuesday, December 1, 2009, 9:50 AM


Hi Rich,

Agreed--seems too thin to be paint.  But, it's too gray to be cadmium, and too
dark to be zinc, as far as I can tell.

Anyone on a first name basis with Nisonger or MoMa that can ask them?

bs


Rich C wrote:
> All that I have observed seem to have been a very dull greyish plating. I
don't think it was paint.
>
> Rich Chrysler
>


-- *******************************************************************
Bob Spidell           San Jose, CA            bspidell at comcast.net

*******************************************************************
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

You are subscribed as walt2727 at yahoo.com

http://www.team.net/archive