[Healeys] Top installation

[Rich C]

Is there an overlapping edge of top material on the under side that would be 
about 6" past where the metal would show through. i.e where the rear deck 
anchors would be positioned?

Rich Chrysler
----- Original Message ----- 
From: "Quentin Schweninger" <quenty at wildblue.net>
To: "Healey List" <healeys at autox.team.net>
Sent: Saturday, August 15, 2009 2:35 PM
Subject: [Healeys] Top installation


> Hello all,
>  Daisy is about 98% complete. The last big job is installation of the 
> top.
>  Last weekend I unpacked the top and started to slip the steel  stiffner 
> into the pocket across the back, only to discover that the  whole pocket 
> is glued shut, all the way across the back.
>  This pocket is 4' long and 1-1/2" wide, with a slight curve.
>
> Another Screw up. Guess who?
>
> Jamming something thru will leave me with a bigger mess than I have Now,
>  Any ideas?
>                    Dave and Daisy 
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler at quickclic.net
>
> http://www.team.net/archive