[Healeys] Speedo Cable and the washer

[Norman Nock]

mirek ... Factory service bulletin # 37 Oct 1962     You will find a copy of
this in Austin Healey Magazine June 1996  OR  page 149 in      my Tech Talk
Book ..     Thie Bulletin shows a drawing 3/8" from end of outer cable to end
of inner cable at         speedo end                               ... Norman
Nock. 


--- On Sat, 8/8/09, Mirek Sharp <m.g.sharp at sympatico.ca> wrote:

From: Mirek Sharp <m.g.sharp at sympatico.ca>
Subject: Re: [Healeys] Speedo Cable and the washer
To: "Bob Johnson" <bjsbj8 at gmail.com>, "john spaur" <jmsdarch at sbcglobal.net>
Cc: "Healeys" <healeys at autox.team.net>
Date: Saturday, August 8, 2009, 3:55 PM

Nisonger say the correct protrusion of the inner cable at the speedo head is
7/16".

Mirek

----- Original Message ----- .... I am not sure what the correct penetration
should be though.
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

You are subscribed as sjnnock at sbcglobal.net

http://www.team.net/archive