[Healeys] Socket Drive Dimensions

[Oudesluys]

The drives are still 1/4, 1/2, 3/4, 1 etc. inch. There is no logic in 
the world.
Kees Oudesluijs
NL


Johnsen, Bernard F (AS) schreef:
> Folks -
> 	As we all know, the U.S.A. is one of the few (if not the only)
> country that has not adopted the Metric System. I am not trying to
> revive this particular religious war, but I was wondering about
> something. Over the years I have acquired a great many sockets and
> ratchets. They come in several "drive" sizes - quarter inch, three
> eighths inch, half inch, and three quarter inch. Does the rest of the
> world use these drive dimensions, or do they have comparable metric
> sizes - perhaps 10 MM drive or 15 MM drive ? Just wondering.
> 	Healey content: I use these sockets to work on my BJ8.
>
> 	- Bernie Johnsen 1967 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as coudesluijs at chello.nl
>
> http://www.team.net/archive
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.5.392 / Virus Database: 270.13.42/2279 - Release Date: 08/03/09 05:57:00