[Healeys] Heater Part

[Mark LaPierre]

John,  I also was missing the same panel and ordered it thru Moss.   One 
plus is
that it did have the big  SMITH name stamped on it  as original.  That was a 
nice surprise and
it was ready for install and fit perfect.   You will also need the side 
clips.

Mark


----- Original Message ----- 
From: "John Snyder" <helyjohn at cablespeed.com>
To: <healeys at autox.team.net>
Sent: Saturday, April 18, 2009 1:33 PM
Subject: [Healeys] Heater Part


> Does anyone have a decent, used bottom panel for the heater core box for a
> BN7?  I'm doing a ground up restoration on a 1959 BN7 that has been badly
> abused.  Some dumb P O threw the bottom panel away, probably thinking he 
> could
> get more heat this way.  Moss wants $45 for a simple sheet metal panel. 
> This
> is going to be an expensive project, so would like to save a little money 
> on
> the simple stuff.
>
> John Snyder
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as lapierrem at sbcglobal.net
>
> http://www.team.net/archive