[Healeys] BJ 8 Clutch Question

[Freese, Ken]

Unbolt the cylinder and let it hang by the hose. Let fluid dribble out
for a minute or so. Or use a distributor wrench to loosen the bleeder
and let the fluid dribble out for a while.

Ken Freese
65 BJ8

-----Original Message-----
From: healeys-bounces at autox.team.net
[mailto:healeys-bounces at autox.team.net] On Behalf Of STOCKLAND at aol.com
Sent: Sunday, April 05, 2009 9:11 AM
To: healeys at autox.team.net
Subject: [Healeys] BJ 8 Clutch Question

Just replaced the flexible hose to the clutch slave cylinder and now I
need to bleed the system.  However, I cannot get to the bleed screw.  Is
there some technique I am missing?  Thanks for your suggestions.

Jon