[Healeys] Starter Issue
rjhco
rjh.co at tx.rr.com
Fri Oct 24 18:48:47 MDT 2008
The solenoid on a GRS should have a full 12V to energize the starter motor,
preferably 12.8V (more than a stock Healey starter requires). I experienced
continuing hot start problems with my GRS until adding a relay to the
solenoid circuit. The OEM wiring harness drops a lot of voltage through the
ignition switch and wiring. Try a fresh battery with a lead directly to the
solenoid trigger point.
Best regards,
Jim Hockert
Dallas, TX
More information about the Healeys
mailing list