[Healeys] wiring or testing of electronic Tach question , testing of fuel gauge

[Alan Seigrist]

Jerry -

It's not the direction of the loop but which way the current goes.
Cut the wire at both ends of the loop and swith the wires around until
the tach starts working.

Be sure to solder the connections properly - there is a lot of current
that goes through this wire.

Alan


On 10/20/08, Jerry Costanzo <grumpyinloomis at ssctv.net> wrote:
> Could someone tell me about which direction the white wire wraps around the
> post on the electronic tach?  Clockwise or counter clockwise?  This has been
> converted to neg ground!
>
>
> Is there a bench test for the BJ8 fuel gauge?   I measure 62 ohms across the
> connectors.
>
>
> Thanks for your help.
>
> Jerry
>
> BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut at gmail.com
>
> http://www.team.net/archive
>

-- 
Sent from my mobile device

Alan

'52 A90
'53 BN1
'64 BJ8