[Healeys] Jack Hold Down Strap

[Rich C]

Hi John,

I will quote from the National Concours Originality Guide, 2008 edition, 
page 208.....

"Jack Securing Strap  Austin part Number AAA2064 or AAA4258 or AAA5217. A 
strap of black cotton "duck" webbing, 16 1/2" long and 1" wide was added to 
the tool kit at chassis number 11280 (BN7) and 11585 (BT7). It is used to 
secure the jack to the left hand bumper bracket inside the boot. The buckle 
is painted black and has "ROKO" (with the " marks) stamped into it."

Hope this helps,

Rich Chrysler

----- Original Message ----- 
From: "John Rowe" <jarowe at westnet.com.au>
To: "Rich C" <richchrysler at quickclic.net>
Cc: "Healey List" <healeys at autox.team.net>
Sent: Tuesday, October 07, 2008 10:46 AM
Subject: Re: [Healeys] Jack Hold Down Strap


> Hi Rich
>
> Could you advise us not so knowledgeable where the jack and strap are 
> located. I can't find anything in my parts book for my BT7.
>
> Regards
> from west oz
>
>
> John Rowe
> Perth
> March 1959 BT7
>
>
> ----- Original Message ----- 
> From: "Rich C" <richchrysler at quickclic.net>
> To: "KENNETH MASON" <MEDITIONM at msn.com>; "Healey List" 
> <healeys at autox.team.net>
> Sent: Tuesday, October 07, 2008 11:46 AM
> Subject: Re: [Healeys] Jack Hold Down Strap
>
>
>> Ken,
>>
>> The jack hold down strap is not leather, it's a black woven webbing strap
>> with gloss black buckle marked "ROKO" and gloss black end tip. It's about 
>> 1"
>> wide x 16 1/2" long.
>>
>> Rich Chrysler
>>
>> ----- Original Message ----- 
>> From: "KENNETH MASON" <MEDITIONM at msn.com>
>> To: "Healey List" <healeys at autox.team.net>
>> Sent: Monday, October 06, 2008 10:22 PM
>> Subject: [Healeys] Jack Hold Down Strap
>>
>>
>>> Can someone tell me the width of the jack leather hold down strap for a
>>> BJ7
>>>
>>> Thanks
>>> Ken Mason