[Healeys] BN1 fron wheel bearings

[Alan Seigrist]

Peter -

According to their website, they have the thrust bearings in stock for the
BN1.  You may want to send them an email just to be sure:

http://www.bearing-supplies.co.uk/CLASSIC%20CAR%20LISTINGS.htm

Best Regards,

Alan

'52 A90
'53 BN1
'64 BJ8


On Wed, Nov 19, 2008 at 8:46 AM, Peter Linn <greylinn at ozemail.com.au> wrote:

> G'day list. I've just been supplied by a local "specialist" with inner
> front
> wheel bearings for my "new" BN1. These bearings are labelled "TR6 front O/D
> (sleeve)" and are County Brand, made in India (itself a worry!) The bearing
> although of the same dimensions as the old ones are not thrust type
> bearings,
> ie with a lip on one side and marked "thrust", to be installed with this
> face
> to the spacer presumably to carry the pre-load. The bearing supplied are
> umarked and are the same both sides. Any comments?
>
> Cheers
>
> Peter Linn
> Brisbane
> BN1 Ward Spl
> BN1 Holden V6
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut at gmail.com
>
> http://www.team.net/archive