[Healeys] BJ8 door glass install

[BJ8Healeys]

Hi, Mark -

Install glass into one frame piece at a time, then rivet.  You might want to
use something like an awl to help make sure the rivet holes are lining up as
you mate the second frame piece to the glass.

I didn't have any success with the glazing strips provided by Moss.  They
would not swell properly to grip the glass.  I gave up and took my glass and
frames to the local glass shop.  They did the whole job for 7 bucks, using
modern materials to put the glass into the frames, and also installed the
rivets.

Steve Byers
HBJ8L/36666
BJ8 Registry
Havelock, NC

-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of mark buggy
Sent: Saturday, November 15, 2008 2:35 PM
To: healeys at autox.team.net
Subject: [Healeys] BJ8 door glass install

Hello second try on this since i got some kinda bounce back
What is the best sequence for installing door glass?  I have the frames
apart.  Should I rivet the frames together first, or install glass to one
frame then rivet?

Mark Buggy
'67 BJ8

No virus found in this outgoing message.
Checked by AVG - http://www.avg.com 
Version: 8.0.173 / Virus Database: 270.6.20/1790 - Release Date: 11/15/2008
9:32 AM