[Healeys] thrust washer thickness for oil drive spindle.

richard mayor mayorrichard at hotmail.com
Sun May 11 23:10:09 MDT 2008


Jerry, You should be able to spot the thrust washer quite easily. It is very
shiny, about twice the thickness of the average washer and is champhered on
one side of the hole. It will stand out from the others.  Richard Mayor> From:
grumpyinloomis at ssctv.net> To: healeys at Autox.Team.Net> Date: Sun, 11 May 2008
21:05:45 -0700> Subject: [Healeys] thrust washer thickness for oil drive
spindle.> > I was working on my engine this weekend and found that the thrust
washer has> been misplaced from the driving spindle. I am talking about the
drive for the> oil pump. Does anyone happen to have the thickness of the
thrust washer so I> can try to find it in the pile of parts? I have listed the
part number> here from Moss which may help identify my question.> > Part #
021-422> > Jerry> BJ8 still in pieces.>
_______________________________________________> Support Team.Net
http://www.team.net/donate.html> > Healeys at autox.team.net>
http://autox.team.net/mailman/listinfo/healeys> > You are subscribed as
mayorrichard at hotmail.com> > http://www.team.net/archive
_________________________________________________________________
With Windows Live for mobile, your contacts travel with you.
http://www.windowslive.com/mobile/overview.html?ocid=TXT_TAGLM_WL_Refresh_mob
ile_052008


More information about the Healeys mailing list