[Healeys] Fw: I wish I would have done this before I put the engine in?

Rich C richchrysler at quickclic.net
Fri Mar 28 19:54:19 MST 2008


Jerry,

Sounds like you haven't been there before. Some of the fender bolts won't be 
accessible from the fender side only. There's an inner wheel arch in the 
way, unless you can hire a fellow with arms and fingers like E.T. Also that 
would mean installing the clips onto the shroud flange which for most of the 
length has a J shaped flange running along the bottom edge.
Front shroud on or off is optional but easier with it off.
----- Original Message ----- 
From: "Jerry Costanzo" <grumpyinloomis at ssctv.net>
To: <healeys at Autox.Team.Net>
Sent: Friday, March 28, 2008 9:18 PM
Subject: [Healeys] Fw: I wish I would have done this before I put the engine 
in?


>> No 2a, 5, 6, 7 are done.   I have never tried putting the inlet and
>> exhaust on prior to having the engine installed.  Might be worth trying.
>> Would you install the engine prior to putting on the front shroud?    I 
>> am
>> hoping to set up all the fender bolts so they can be accessed from the
>> fender side, not the engine side.
>>
>> Gearbox is going in with the engine.  I have done them separate and that
>> is no fun.
>>
>> 10. sounds good
>> 11  has beer involved, that does not taste good, but I will substitute.
>> 12.  I can hardly wait.
>>
>> Jerry
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler at quickclic.net
>
> http://www.team.net/archive 


More information about the Healeys mailing list