[Healeys] bulb houlders

[pennell at cox.net]

Don,

I had the same deal several years ago with my BN7 resto.   I chose to replace the new sockets with the orig ones.  Bulbs fit much better and I thought it was just a good idea to have orig sockets.

Keith Pennell

> HI List does anyone have any past experence with new wiring harness?I bought a new harness from British Wiring in IL.2 years ago.I'm just now puting my 67BJ-8 back together.I'm now doing the dash wiring.I thought I would install new bulbs for all the dash lights into my new wiring harness bulb houlders.I bought new bulbs from moss.the box was from the UK.When I try to screw in the bulbs to the new bulb houlders in the new wiring harness the bulbs just spin.I screw them into the old wiring harness bulb sockets and they screw down tight?Is there a larger  base bulb that I can use? Or should I cut off they new harness bulb sockets and solder my old ones on?Any thoughts?
>             Don