[Healeys] upper trunion bushings

Bob Spidell bspidell at comcast.net
Sun Mar 16 11:53:27 MST 2008


Brad,

Depends on whether you want more positive or more negative camber.

Hole towards chassis: more positive.

Hole away from chassis: more negative.

Usually, Healeys have excessive positive camber--at least my BJ8 did--so 
you'd want to move the offset hole away from the chassis.   This pulls 
the trunnion in, hence more negative (or less positive) camber.

bs


mail.maineguide.com wrote:
> I just purchased new bushings for my BJ8 from BCS including the offset upper 
> trunions. To show how brain dead I am I can't figure out which way the 
> offset should go. Many thanks
> Brad Holden 
> _______________________________________________
>
>   


-- 
***************************************************************
Bob Spidell         San Jose, CA        bspidell at comcast.net
'67 Austin-Healey 3000             '56 Austin-Healey 100M
***************************************************************


More information about the Healeys mailing list