[Healeys] BJ8/Bend Pak lift problem

[Jaap Aeckerlin]

Terry, is it a consolation to you when I tell you that I have exactly the
same problem on my Dutch manufactured Koni car lift? I extended the ramps
with  two feet long wooden planks - stupid sight but it helps.
Jack Aeckerlin, The Netherlands
1964 BJ8 29432

2008/3/10, TERRY COLL <coll44 at msn.com>:
>
> All,
>
> Wondering if anyone else with a BJ8 and a Bend Pak (model HD-9STB) lift
> has
> had problems getting on and off the lift.  My left muffler catches by
> about a
> half inch when backing out and I'm wondering if the mufflers are too low.
> Seems like there about a half inch of free play between the exhaust pipe
> at
> the back of the muffler and the frame and I'm suspecting that's about
> right.
>
> Terry Coll  '64 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as j.aeckerlin at gmail.com
>
> http://www.team.net/archive