[Healeys] Bolt direction for holding the spring plate on BN2

[John Sims]

Except in Oz where everything is upside down. Or, if you live there, I guess
that we are upside down. Tadek, aren't you a little sorry y ou started this
mess????

John Sims, BN6
Aberdeen, NJ
 
www.healey6.com

-----Original Message-----
From: healeys-bounces+ahbn6=optonline.net at autox.team.net
[mailto:healeys-bounces+ahbn6=optonline.net at autox.team.net] On Behalf Of Bob
Spidell
Sent: Saturday, June 28, 2008 4:16 PM
To: Patrick and Caroline Quinn
Cc: 'Tadeusz Malkiewicz'; healeys at autox.team.net
Subject: Re: [Healeys] Bolt direction for holding the spring plate on BN2

FWIW, the parts book shows the bolt heads on the top and the nuts on the 
bottom.

bs



Patrick and Caroline Quinn wrote:
> G'day Tadek
>
> Just happen to know that off the top of my head.
>
> The nuts are at the top.
>
> How do I know? Mine are the other way.
>
> Hoo Roo
>
> Patrick Quinn
> Sydney, Australia
>
> -----Original Message-----
> From: healeys-bounces+p_cquinn=tpg.com.au at autox.team.net
> [mailto:healeys-bounces+p_cquinn=tpg.com.au at autox.team.net] On Behalf Of
> Tadeusz Malkiewicz
> Sent: Saturday, 28 June 2008 5:58 AM
> To: healeys at autox.team.net
> Subject: [Healeys] Bolt direction for holding the spring plate on BN2
>
> Hello,
>
> Need some help - what is the direction of the bolts holding the bottom
> spring plate to the two link arms? Is the nut on top or bottom?..
>
> Thanks, Tadek