[Healeys] Grease for king pins
Bob Spidell
bspidell at comcast.net
Tue Jun 24 16:18:11 MDT 2008
Any good general-purpose grease should work. I like "moly" (molybdenum-based) grease.
Bearing grease would probably be too thick to get through the zerks (think that's Polish for "nipple" ;)
bs
--
***************************************************************
Bob Spidell San Jose, CA bspidell at comcast.net
'67 Austin-Healey 3000 '56 Austin-Healey 100M
***************************************************************
-------------- Original message ----------------------
From: Tadeusz Malkiewicz <tadeusz.malkiewicz at plusnet.pl>
> Hello,
>
> A quick question - what sort of grease should be used for king pins? Bearing
> grease? Or other?,
>
> Thanks, Tadek
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as bspidell at comcast.net
>
> http://www.team.net/archive
More information about the Healeys
mailing list