[Healeys] shock towers

[James Shope]

checked the archives but no luck.  i am trying to determine the best way to
remove the old shock tower plate on a bj7 which is kaputt.  it is on the
driver side and i assume you have to remove the steering gear.   do you cold
chisel or grind it off.  i am also assuming the new shock plates have the
captive nuts welded in already.  we are going to have a mobile welding guy
come by to weld the new plate.  what do i need to tell him about making sure
everything is in the exact place and how critical it is, etc.,
healeymanjim