[Healeys] Radio antenna

tomfelts at windstream.net tomfelts at windstream.net
Sun Jul 27 12:21:47 MDT 2008


Mine was one of the skinny metal antenna's so it tended to flap around.  If I hook it up again, I'll use a larger one.  I did kinda like the looks of it.  My problem with the CB was that I couldn't hear it at speed.  Don't think it had ear phone jacks either.
> 
> From: "Mr. Bill" <bn1 at pacbell.net>
> Date: 2008/07/27 Sun PM 01:44:04 EDT
> To: Healey List <healeys at autox.team.net>
> Subject: Re: [Healeys] Radio antenna
> 
> Another friend of mine, also on this List and who I thought would 
> answer, hid his horizontally under the rocker panel.  As I remember the 
> reception was pretty terrible BUT you couldn't see the antenna.  :-)   
> Maybe he'll verify that.?
> 
> I, too, have a CB antenna with a quick release on the RR bumper mount.  
> My fiberglass antenna doesn't whip around at speed and when removed, the 
> mount is hidden by the bumper.  I like it that way.  How many of you who 
> went to Conclave even noticed it?
> 
> Bill Barnett
> BN1M
> 
> tomfelts at windstream.net wrote:
> > Right rear of the front wing--as yours is.  I like it there.  Some have put it on the right rear wing. but I don't like it at all there.  You could put a mount on the rear bumper attachments and mount it there.  I had a CB antenna there once and it looked pretty good.  But--at speed it tended to "flap" around a lot.
> >   
> >> From: "Elton Schulz" <eschulz at frontiernet.net>
> >> Date: 2008/07/26 Sat PM 11:50:44 EDT
> >> To: "Healey List" <healeys at autox.team.net>
> >> Subject: [Healeys] Radio antenna
> >>
> >> Fellow listers,
> >> The radio antenna for my vintage radio is mounted on the right front fender of
> >> my BJ7. I'm not sure I like it's location. I think it detracts from the look
> >> of the car. Since I'm restoring the car, I'm considering closing the hole in
> >> the fender and relocating the antenna so it's not so obtrusive. Where have you
> >> mounted your antenna on your cars? Any options out there where the antenna
> >> does not protrude from the sheet metal (i.e. more invisible)?
> >> Elton
> >> BJ7 in progress
> >> _______________________________________________
> >> Support Team.Net http://www.team.net/donate.html
> >>
> >> Healeys at autox.team.net
> >> http://autox.team.net/mailman/listinfo/healeys
> >>
> >> You are subscribed as tomfelts at windstream.net
> >>
> >> http://www.team.net/archive
> >>     
> > _______________________________________________
> > Support Team.Net http://www.team.net/donate.html
> >
> > Healeys at autox.team.net
> > http://autox.team.net/mailman/listinfo/healeys
> >
> > You are subscribed as bn1 at pacbell.net
> >
> > http://www.team.net/archive
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> You are subscribed as tomfelts at windstream.net
> 
> http://www.team.net/archive


More information about the Healeys mailing list