[Healeys] BJ8 Hub Splines - help???

Michael Salter msalter at precisionsportscar.com
Sat Jul 19 12:26:59 MDT 2008


The difference in the splines is in the TPI of the knock off nut thread. All
the splines are the same.
Up to and including Phase I BJ8's the threads were 12 TPI and thereafter
they are 8 TPI.
Michael Salter


-----Original Message-----
From: healeys-bounces+msalter=precisionsportscar.com at autox.team.net
[mailto:healeys-bounces+msalter=precisionsportscar.com at autox.team.net] On
Behalf Of Robert Blair
Sent: Saturday, July 19, 2008 2:02 PM
To: Healey List
Subject: [Healeys] BJ8 Hub Splines - help???

Chassis Expert Listers,

Question has just come up on the number of splines on the BJ8 hub.

Questions are:

Is there a coarse vs fine difference between early and later cars?

For a mid 65 [32038] Mk3 Ser2 with trailing arm susp, which do I have?

In ordering wires for a BJ8, is it necessary to define the spline count?

Thanks ..........

Robert N. Blair  65 Yellow BJ8  rnbmail at yahoo.com
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

You are subscribed as msalter at precisionsportscar.com

http://www.team.net/archive


More information about the Healeys mailing list