[Healeys] Replacement Radiator Fan

Patton Dickson 57healey at gmail.com
Mon Jul 14 08:43:58 MDT 2008


I wonder if that is the same type fan that has been on ebay recentlly?



On 7/14/08, BJ8Healeys <sbyers at ec.rr.com> wrote:
> I had an incident a few years ago with a Moss Chinese-manufactured 6-bladed
> fan.  Eight months and 2500 miles after I installed it, two blades broke off
> at the root, damaged the radiator header tank, and knocked the fan guard
> loose.  My homemade fan shroud kept the blades and guard from going into the
> bonnet.  The materials lab at work analyzed the failures and said it was due
> to metal fatigue.
> Moss replaced my radiator and sent me an identical fan, but a few weeks
> later they sent out a bulletin asking anyone who had bought the six-bladed
> fan to remove it immediately and return it.  When I removed mine, I found
> paint chipping in the exact place that the first blades broke.  Moss
> replaced the fan with a stainless one, but I only used that one for a short
> time due to its noise.  I now run a Texas Kooler and am very happy with it.
>
> I would venture to say that any fan that sheds a blade will do so due to
> fatigue, and there is nothing practical that can be done to modify it to
> reduce fatigue, which is dependent on the fan material and its mechanical
> design.
>
> Steve Byers
> HBJ8L/36666
> BJ8 Registry
> Havelock, NC  USA
>
> -----Original Message-----
> From: healeys-bounces+sbyers=ec.rr.com at autox.team.net
> [mailto:healeys-bounces+sbyers=ec.rr.com at autox.team.net] On Behalf Of Mark
> LaPierre
> Sent: Wednesday, July 02, 2008 6:40 PM
> To: Ron Fine; healeys at autox.team.net
> Subject: Re: [Healeys] Replacement Radiator Fan
>
> Sorry Ron, I have switched to the Texas Cooler but haven't experienced a
> high heat issue yet , since install,  to comment.
>
> However I did have a question on the same  topic.
> This fan issue has come up before but I don't recall any mention of
> preventative maintenance that can be taken to prevent a blade from flying.
> Has anyone
> tried adding a couple of pop rivets,  J B weld or even a couple of spot
> welds to the fan blades to keep them in place without throwing the fans off
> balance.
>
> I assume this would have to be done evenly on all of the blades.
>
> This "flying blade syndrome" puts a whole new meaning to the checking under
> the hood routine.
>
> Mark
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as 57healey at gmail.com
>
> http://www.team.net/archive
>

-- 
Sent from Gmail for mobile | mobile.google.com

Patton Dickson - http://Austin-Healeys.com - Plano, TX
1957 Austin-Healey 100-Six "Built to run 'til the road wears out."


More information about the Healeys mailing list