[Healeys] Fasteners - Specifications.

[Mark and Kathy]

I would suspect that to be a #10 screw, with 32 thread  (fine), with oval 
head.

SS screws in that size are pretty common at hardware stores if that would
work.

Mark


----- Original Message ----- 
From: "Alan" <alanb at nfahc.co.uk>
To: "'Healey List'" <healeys at autox.team.net>
Sent: Wednesday, January 23, 2008 3:36 PM
Subject: [Healeys] Fasteners - Specifications.


> Hey gang.
> I have an arcane fastener question that I am struggling with.
>
> The screws used to retain the aluminium cockpit trim rails are listed as
> RPP0312's. The decode of this identifies them as Raised Countersunk 
> screws,
> Chrome plated with pointed tips. No.10 thread and 3/4" long.
>
> That's good so far - but what is a No.10 screw thread, or a No.6 (02) for
> that matter?
>
> Many thanks.........
> _______________________________________________
> (______________  Alan Bromfield  _______________)
>   (______     \____1957-BN4 ___/    _______)
>          (_________________________)
>            http://www.nfahc.co.uk
>        http://www.healey-weekend.com
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as mgtrcars at galaxyinternet.net
>
> http://www.team.net/archive