[Healeys] Subject: BJ8 Exhaust

[James Sailer]

Hi Tom,

I had one on my BJ8 for a while.  I went back to a stock configuration (Bell
Stainless system) for no big reason other than I wanted it stock.  The Monza
system I had is in my shop attic .. complete with downpipes that were powder
coated with heat reflecting material.  I adjusted the length of one downpipe
to match the Monza system better.  I think it is complete except for clamps
and rubber hangers (which I used the stock hangers as I recall).  I used it
for about 2 k miles.  Attached are some photos of my car with it on.  (It has
about the same amount of wear as the pic with the hardtop shows).  It was a
bit lower than a stock configuration and you had to be more careful but it
sounded nice! .. I lengthened it to make it exit past the rear bumper so there
was little blowback into the car (like a stock system).  The original length
gave me some odor.  All in all I sunk some bucks into making it a good fit.
Drop me a line off the list if you are interested.

Jim Sailer 66 BJ8

[demime 1.01d removed an attachment of type image/jpeg which had a name of DSC00058.jpg]

[demime 1.01d removed an attachment of type image/jpeg which had a name of Dsc00253.jpg]

[demime 1.01d removed an attachment of type image/jpeg which had a name of DSC02673.JPG]

[demime 1.01d removed an attachment of type image/jpeg which had a name of DSC00479.JPG]