[Healeys] Sagging hinges

[Elton Schulz]

I first removed the hinge from the door and heated the hinge carefully with 
a propane torch and then drove the pin out with a punch and hammer.
On one of my hinges the pin was actually broken in half and could not be 
driven out. I ended up cutting the inner half of the hinge from the outer 
half and then was able to drive the two halves of the pin out.
Good luck.
Elton
----- Original Message ----- 
From: "Pieter and Linda Scheenhouwer" <pieterscheen at optusnet.com.au>
To: "Healey List" <healeys at autox.team.net>
Sent: Tuesday, January 15, 2008 6:18 AM
Subject: [Healeys] Sagging hinges


>I need to rebuild the door hinges on my BJ7. Does anybody know any tricks 
>to
> getting the pins out? There doesn't seem to be any lock pins but heating 
> in
> the home oven and driving the hinge pin with a punch and hammer just makes 
> a
> lot of noise. Any suggestions welcomed,
>
> Cheers
>
> Pieter