[Healeys] BN1 Jack Handle

[Wwycoffbn7 at aol.com]

Steve,
 
As Richard said, congratulations on securing a proper jack for your  BN1.  
 
The jack handle section on eBay should be a good start to  complete the set.  
For me it is hard to tell if it is a driving end with  the 3/4 inch swollen 
end and a spring loaded 1/4 inch ball.  It  might be the section that has a 
swollen 3/4 inch end with a hole for the tommy  bar.  
 
Normally, the driving section carries a sleeve unit that provides a  socket 
for connecting the second section.  While that does not  seem to visible on the 
picture, it could mean the available piece is the tommy  bar end, or that you 
might have to add a sleeve piece to it.  If  you obtain the section, I 
suggest that you wait until getting the other  section before adding a sleeve. 
 
It looks like handle is a proper, 14 inch long unit.  Even if it is a  longer 
one, you can cut it down.  So, no matter if it is one section of the  other, 
it would be good to snag it now so long as the price does not get out of  hand.
 
One question to ask the seller is if it is the driving section, does the  
spring loaded ball work.
 
Good luck,
 
Bill



**************************************See AOL's top rated recipes 
(http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004)