[Healeys] Steering column attachment

[Rich C]

Hi Jerry,

Use whatever hole seems to allow the steering column to pass through the 
(fairly adjustable) bulkhead grommet plates and allows the steering column 
to sit centrally in the inverted "U" shape of the dash cutout. Make sure all 
these positioning points are "happy" without any bending or strain on the 
column or any of the attachment points. There is a fair amount of vertical 
adjustment with the bolts at the steering box end.

Rich Chrysler



----- Original Message ----- 
From: "Jerry Costanzo" <grumpyinloomis at ssctv.net>
To: <healeys at Autox.Team.Net>
Sent: Monday, February 18, 2008 11:58 AM
Subject: [Healeys] Steering column attachment


>I put the steering column in yesterday and have a question for the list. 
>The
> aluminum ring that surrounds the column towards the top, and then connects 
> to
> the steering bracket, has 4 holes to attach the ring.
>
> I tried the top hole and the column seems too tight.
>
> Do you usually just let it fit into one of the holes, or push it higher or
> lower?
>
> Jerry
> BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler at quickclic.net
>
> http://www.team.net/archive