[Healeys] Running engine

[Bob Spidell]

Sounds like the Pertronix isn't wired correctly.  


bs

--
***************************************************************
Bob Spidell         San Jose, CA        bspidell at comcast.net
'67 Austin-Healey 3000             '56 Austin-Healey 100M
***************************************************************

 -------------- Original message ----------------------
From: gardner5 at comcast.net
> Just finishing up my BN2 engine rebuild.  The engine keeps running after the 
> ignition is shut off.  Idle is set below spec., timing 6 degrees, and it does 
> have a Petronix ignitor.  Any ideas? 
>  
> Joel