[Healeys] Rotors - it happened ....

[NPaul72464 at aol.com]

I agree and have been using a ground down rotor for years with no  problem.  
And I have a spare ground down.
Ned Paulsen
 
 
In a message dated 8/28/2008 3:40:44 P.M. Eastern Daylight Time,  
jobu53 at hotmail.com writes:

If you  are using a Pertronix system, you need to grind down the rotor so it
sits  farther down on the shaft. I have seen a few dizzy's where rotors were
not  taken down and there is a lot of black dust inside the dizzy. I saw  one
where the center electrode was completely worn away. Dan Serrao1963  BJ7
_________________________________________________________________
Get  ideas on sharing photos from people like you.  Find new ways to  share.
http://www.windowslive.com/explore/photogallery/posts?ocid=TXT_TAGLM_WL_Photo
_Gallery_082008
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

You  are subscribed as  npaul72464 at aol.com

http://www.team.net/archive





**************It's only a deal if it's where you want to go. Find your travel 
deal here.      
(http://information.travel.aol.com/deals?ncid=aoltrv00050000000047)