[Healeys] Rotors - it happened ....

[price at advocateadvisors.com]

Wouldn't you think someone would make quality rotor that would accomodate the dimentions of an electronic ignition without having to go to your shop and grind it?
------Original Message------
From: Dan
Sender: healeys-bounces+price=advocateadvisors.com at autox.team.net
To: healeys at autox.team.net
Sent: Aug 28, 2008 2:38 PM
Subject: Re: [Healeys] Rotors - it happened ....

If you are using a Pertronix system, you need to grind down the rotor so it
sits farther down on the shaft. I have seen a few dizzy's where rotors were
not taken down and there is a lot of black dust inside the dizzy. I saw one
where the center electrode was completely worn away. Dan Serrao1963 BJ7
_________________________________________________________________
Get ideas on sharing photos from people like you.  Find new ways to share.
http://www.windowslive.com/explore/photogallery/posts?ocid=TXT_TAGLM_WL_Photo
_Gallery_082008
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

You are subscribed as price at advocateadvisors.com

http://www.team.net/archive


Sent via BlackBerry by AT&T