[Healeys] Uprated Front Sway Bar

[Tracy Drummond]

Bob,

I installed the up-rated sway bar from Moss? I gave my old one to Ray Juncal
of valve cover fame for his 100.  As I recall this hand me down is an
up-rate for his 100.  By the way the front most bushings are standard for
the MGB so if the 100 did not need them (Ray had some) a cousin MGBer can
since they are a direct interchangeable stock replacement. I also added
off-set upper trunion bushings to zero out my camber from positive to very
so slightly negative.

The combination has been a delight, the car is much less nervous and twitchy
(camber) and slightly flatter in the corners.

Varooooom!

Tracy Drummond                  Gang Warily !
President AHCUSA              www.healey.org

-----Original Message-----
From: healeys-bounces+bighealey=charter.net at autox.team.net
[mailto:healeys-bounces+bighealey=charter.net at autox.team.net] On Behalf Of
Bob Spidell
Sent: Wednesday, April 23, 2008 6:39 AM
To: healeylist
Subject: [Healeys] Uprated Front Sway Bar

Folks,

Anyone fitted the uprated front sway bar kit from Cape?  If so, how does
is affect handling?  Any downside (e.g. extra stress on the shock or
chassis mounts)?

Looking for a little bit more "flat" in my corners.


bs

--
***************************************************************
Bob Spidell         San Jose, CA        bspidell at comcast.net
'67 Austin-Healey 3000             '56 Austin-Healey 100M
***************************************************************
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

You are subscribed as bighealey at charter.net

http://www.team.net/archive