[Healeys] (no subject)

[Tracy Drummond]

Bill,

Peter is dead on.  One note to keep in mind.  The points spring must be
isolated from the point plate post (which is chassis ground) but makes the
contact from one side of the points to the condenser and coil.  The key here
is to remember the stepped insulating washer keeps the post (ground)
isolated from the wire and the spring.

Hope this makes sense.  Cheers!

Tracy Drummond                  Gang Warily !
President AHCUSA              www.healey.org

-----Original Message-----
From: healeys-bounces+bighealey=charter.net at autox.team.net
[mailto:healeys-bounces+bighealey=charter.net at autox.team.net] On Behalf Of
Peter Schauss
Sent: Friday, April 18, 2008 1:54 PM
To: healeys at autox.team.net
Subject: Re: [Healeys] (no subject)

Bill,

The washers go in this order from bottom to top:

- insulating washer
- spring for the points
- wires from condenser and coil
- insulating washer
- nut

HTH,
Peter Schauss

> -----Original Message-----
> From: healeys-bounces+schauss=worldnet.att.net at autox.team.net
> [mailto:healeys-bounces+schauss=worldnet.att.net at autox.team.net] On Behalf
> Of Bill Park
> Sent: Wednesday, February 13, 2008 9:39 AM
> To: healeys at autox.team.net
> Subject: [Healeys] (no subject)
>
> I need help installing points on my 100.
> Where do the insulating washers go, and where do the wires from the
> condenser
> and coil go?
> I installed new points a year ago, but one of the posts broke. When I
> disassembled, I wasn't diligent about recording the sequence.
> It was running, believe it or not, but now I can't get it to fire.
> Thanks for your help.
>
> Bill
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as schauss at worldnet.att.net
>
> http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

You are subscribed as bighealey at charter.net

http://www.team.net/archive