[Healeys] Carb jet tube clearance

[Dave Schweninger]

[demime 1.01d removed an attachment of type image/jpeg which had a name of DSCN2701.jpg]
Dan
I also have a 62 BN7 Tri-carb
My rear carb jet head is inside the steering column about 1/4". With  
no Choke, the bottom of the jet is about 3/16 above the CL of the  
column. The attached pic. shows the Carb balance tube's alignment  
with the OD throttle Switch. If thats OK It must be the stack up of  
gaskets. spacers. heatshield.etc. All this is assuming mine is correct.
Good Luck
Dave and Daisy

[demime 1.01d removed an attachment of type image/jpeg which had a name of DSCN2700.jpg]