[Healeys] BJ8 door - glass weather strip

[Alan Seigrist]

Just slide the window out - easy.  Remove the regulator limiter then
wind the window all the way up, you'll be able to pull it out then you
can do the inner felt very easy.

Alan


On 9/26/07, T W <ah3000me at gmail.com> wrote:
> Hi,
>
> I need to replace the inner and outer weather strips in the door of my
> BJ8 (1966).    These are the strips that seal against the glass as it
> goes up and down in the door.
>
> Does anyone have some advice on how best to do this?   The outer
> doesn't look too bad to do,  but the replacing the inner strip looks
> tricky.
>
> thanks in advance,
>
> Tom
> _______________________________________________
> healey.nut at gmail.com
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>


-- 
Alan

'52 A90
'53 BN1
'64 BJ8