[Healeys] Engine oil leak

[Bob Yule]

    Hi Jack, we use a part from Moss US.  I believe they are used on 
MGB/MGC.  There is a bushing and a cup washer.  The part numbers are 324-335 
& 324-345.
Cheers.......Bob
Check out our web site www.autofarm.net
----- Original Message ----- 
From: "Ph.J.Aeckerlin" <j.aeckerlin at tiscali.nl>
To: "Healey forum" <healeys at autox.team.net>
Sent: Sunday, September 02, 2007 4:56 PM
Subject: [Healeys] Engine oil leak


> Friends,
> Due to the fact that it has been dry for a couple of days I've been able
> to take the Healey out for a couple of rides despite the fact that I
> have no top yet. I noticed a few drops of oil on my garage floor. At
> first I believed the spin-on oil filter was the culprit but now I've
> seen that the oil comes along the washer of the bolt holding the
> 'inspection doors' on the RH side of the engine.
> I vaguely remember this point was mentioned a few years ago on the list,
> and one lister had a solution in the form of a special metal/rubber
> washer that is normally used in, I believe, a Japanese car - something
> like a Subaru. I believe he even mentioned a part number.
> I would be very much obliged if I could get that part number, or any
> other solution which stops this (tiny) oil leak.
> Thanks in advance, as usual.
> Jack Aeckerlin, The Netherlands
> 1964 BJ8 29432
> _______________________________________________
> autofarm at cyg.net
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.484 / Virus Database: 269.13.2/983 - Release Date: 9/1/2007 
> 4:20 PM