[Healeys] O/D Problems

[Dave Russell]

Hi Greg,

The plunger is physically located under the side cover/solenoid bracket. 
There is a lot of spring pressure under this cover. Release the bolts 
gradually & evenly. With the cover off, deep inside is a brass hex plug. 
It may be very tight so make sure the socket fits well.

Regards,
Dave Russell

Greg Lemon wrote:

>Thanks Bob and John, just what I needed, off I go to get greasy, Greg
>
>----- Original Message ----- 
>From: "Bob Haskell" <rchaskell at earthlink.net>
>To: "Greg Lemon" <glemon at neb.rr.com>
>Cc: <healeys at autox.team.net>
>Sent: Saturday, October 27, 2007 10:38 AM
>Subject: Re: [Healeys] O/D Problems
>
>
>  
>
>>Greg,
>>
>>It's the ball bearing / plunger / spring at the OD hydraulic pump.  See 
>>the picture at the start of Part 2 - 
>>http://www.team.net/www/healey/tech/big_hly/od/delborder_od.html
>>
>>Have you hooked up a pressure gauge to the OD yet?
>>
>>Bob