[Healeys] Eastwood Rust Dissolver

[LEON5050 at aol.com]

A real cheap rust dissolver can be made by mixing molasses in a one to nine  
ratio with water.  It takes a bit longer but works great.  1 -  molasses to 9 
- water.  Just immerse you part in the solution and let it  set.  May take a 
couple of days.  It depends on the amount of  rust.  If the rust is thick you 
need to remove the part every couple of  days and rinse.  At that time it is a 
good chance to check progress.
 
Jim Nichols
BT7



************************************** See what's new at http://www.aol.com