[Healeys] Undoing the crank nut

[bluechip]

Stephen:   A short 6"-12" length of steel chain, one end bolted to the 
flywheel, the other end bolted to the engine back plate.  Works well for me 
every time.

Jim Smith



----- Original Message ----- 
From: "Stephen Hutchings" <s.hutchings at rogers.com>
To: <healeys at autox.team.net>
Sent: Tuesday, October 09, 2007 9:24 PM
Subject: [Healeys] Undoing the crank nut


> With the engine out of the car, it's a bit of a challenge to undo the
> crank nut without the engine turning- I'm thinking of making a
> bracket that would hold the clutch to the back plate, but my friend
> has offered to come by with air tools.  Anyone have another trick for
> this if I get impatient?
>
> Stephen, BJ8
> _______________________________________________