[Healeys] rear axle breather

[Rich C]

Hi Andy,

The white plastic (maybe nylon) axle breather tube on a C series  rear axle 
has a cover cap that should pull straight up and off, whereas the stem is 
threaded so must be carefully unscrewed.

Rich Chrysler

----- Original Message ----- 
From: "andy pole" <ampole at hotmail.com>
To: <healeys at autox.team.net>
Sent: Friday, October 05, 2007 9:27 AM
Subject: [Healeys] rear axle breather


> Guys
> I have just removed the half shafts, diff, bearings, hubs etc from my rear
> axle and would like to get it powder coated. The only thing left to remove 
> is
> the plastic breather tube, is this screwed or pressed into the axle body?
> many thanks Andy
> _________________________________________________________________
> Feel like a local wherever you go.
> http://www.backofmyhand.com
> _______________________________________________
> richchrysler at quickclic.net
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys