[Healeys] FW: BJ8 Brake servo problem

[Dan Stromquist]

John:
I had mine rebuilt by John Stuart Brake Co out of Stoney Creek, Ontario.
Have yet to try it but the job looks good and they guaranteed it.  Rich C
recommended them so I was comfortable.  Their web site is
www.johnstuartpowerbrake.com and tele # 905-662-7274.  Make sure you tell
them whether you want to go concours or not on the finish work.
Dan


-----Original Message-----
From: healeys-bounces+dan=warner-associates.com at autox.team.net
[mailto:healeys-bounces+dan=warner-associates.com at autox.team.net] On Behalf
Of Rebecca Sawyer
Sent: Tuesday, November 27, 2007 9:12 PM
To: healeys at autox.team.net
Subject: [Healeys] FW: BJ8 Brake servo problem

From: John Sawyer [johnbeckysawyer at yahoo.com] 
Sent: Tuesday, November 27, 2007 7:49 PM
To: 'healeys at autox.team.net'
Subject: BJ8 Brake servo problem

 

I have a 65 with a servo that is not original, I think it's Australian.
Patton's Brake Replacements (PBR).   Recently the engine runs rough when
brakeing.  At idle the engine idle speeds up slightly when brakes are
applied.  I think the problem is with the servo affecting the intake
manifold.  Any one have experience with this? 

Can the servo be rebuilt?   
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys