[Healeys] Steering BN1

[Frakes, Jim]

I have two BN1 steering gears I have stripped and cleaned only to find
the pin that fits into the worm gear has a problem. One has the pin
galded with a flat spot and the other has the flat upper portion of the
pin broken, keeping the pin from rotating with the bearings. The new
pins are $180.00! If I spend the $$ I think I might still have a problem
later and do not know it. What is everybody else doing?

I do not have a BN2 or a BT7 gear except for one somebody cut the shaft
off short. I also found one from a Jamaican!! But it is cut short also.


Central Indiana AH Club
Jim Frakes


CONFIDENTIALITY NOTICE
The information contained in this e-mail is intended only for the use of the
individual or entity to which it is addressed and it may contain information
that is privileged or confidential.  If the reader of this message is not the
intended recipient (or the employee or agent responsible to deliver it to the
intended recipient), you are hereby notified that any dissemination,
distribution, or copying of this communication is prohibited.  If you have
received this e-mail in error, please notify us by telephone at the number
listed above or by return e-mail.