[Healeys] Key and Barrel Removal

[rrengineer at dslextreme.com]

Michael,
     O.K., so after the parts are re-chromed and the barrel is replaced
how do you get it all to hold back together again.  Not sure how to
re-crimp the square shaft.
Mike


Michael Salter
> Yes Mike, that is correct. File the high spots off the crimp and with the
> handle in the unlock position the parts will separate.
>
> Michael Salter
> 100 (1953)
> AHX12 (1953)
> Bugeye (1961)
> http://www.netbug.net/blogmichael/-----Original Message-----
> From: healeys-bounces+msalter=precisionsportscar.com at autox.team.net
> [mailto:healeys-bounces+msalter=precisionsportscar.com at autox.team.net] On
> Behalf Of rrengineer at dslextreme.com
> Sent: November 16, 2007 11:22 PM
> To: healeys at autox.team.net
> Subject: [Healeys] Key and Barrel Removal
>
> How do I get the lock barrel out of the boot lock?   Looks like there is a
> crimp in the square shaft that is holding it together.
>
> Mike MacLean
> 56 BN2
> 60 AN5