[Healeys] Brake Master Cylinder

[Dan Stromquist]

Jon:
I just rebuilt both the brake and clutch master cylinders resleved in
stainless steel.  You will need to remove both whether you resleve or not.
I found lots of information in the archives on this subject.
Dan


-----Original Message-----
From: healeys-bounces+dan=warner-associates.com at autox.team.net
[mailto:healeys-bounces+dan=warner-associates.com at autox.team.net] On Behalf
Of STOCKLAND at aol.com
Sent: Thursday, November 15, 2007 1:59 PM
To: healeys at autox.team.net
Subject: [Healeys] Brake Master Cylinder

I need to rebuild my BJ 8 master cylinder.  Does it have to be removed  from

the car or can it be done from inside the drivers compartment?
 
Thanks for your help.
 
Jon



************************************** See what's new at http://www.aol.com
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys