[Healeys] frame 100-m

[patrick harris]

Just wondering what the experts out there recommend as the preferred method is
to check the suspension and frame alignment.  My 100 sustained a push to rh
side front rail, fairly minor but some twisting visible when looking at from
below.  I have a dimension for frame to check all the measurements but what is
hard to tell is where the lower suspension arm mounts if there is any problem
there.  There are alot of angles to measure to see if any of them are off.  I
live in San Diego and have asked a few frame shops but they all do not want to
mess with a car that is not listed in the computers etc as far as the frame
specs for the frame machines.  My thought was to assemble all the front and
lower suspension back onto car and wheel it it to someone have them align it,
it seems I need someone with a good old frame post but just wondering if
anyone has had this issue and if they know of someone in the local southern
cal. area to recommend. Thanks