[Healeys] Front Cowl

[Elton Schulz]

Henry, there is a black mastic (some kind of seam sealer or caulk) between 
the shroud and the chassis at the firewall. I removed my shroud by gently 
prying from both sides. It took a while, but it finally popped loose. You 
have to be patient and careful so that you don't damage the shroud.
Elton
----- Original Message ----- 
From: "henry" <henry at vmtrc.ucdavis.edu>
To: <Healeys at autox.team.net>
Sent: Saturday, June 30, 2007 5:25 PM
Subject: [Healeys] Front Cowl


> Hello List:
> I am trying to remove the aluminum  front cowl. (The last body panel)
> I have drilled all the rivets. I have removed the front bottom mounts.
> I have removed all screws from around the engine compartment.
>
> The cowl feels lose forward of the firewall, but is hard fast from the
> firewall back.
> I am trying to go slow and easy, but I can't find where its stuck.
> Any advise would be greatly appreciated.
>
> Thanks
> Henry
> 1955 BN1