[Healeys] Glove Box Lock Installation

f_simpson at juno.com f_simpson at juno.com
Thu Jun 28 20:27:04 MDT 2007


Bob,
Thanks for the advice, it worked perfectly!!

---------- Forwarded Message ----------
On the inside of the door, remove the three small screws. Then you will be
able to remove the "latch". Then the lockset will come out the front. At
least I think that this is what I recall. Pretty simple really.

HTH,

Bob Johnson
BJ8

----- Original Message -----
From: <f_simpson at juno.com>
To: <healeys at autox.team.net>
Sent: Thursday, June 28, 2007 1:44 PM
Subject: [Healeys] (no subject)


Finally, after many years of searching, I have been able to acquire a glove
box lock for my BJ8 on e-bay.  The door and lock arrived intact.  My question
is how to remove the lock from the door.  I did remove the set screw that
attaches the bezel to the keyway, but the bezel didn't seem to want to
come off.  Since I had to pay dearly for the lock, I certainly don't want to
break it now.  Any suggestions?

Frank
'64 BJ8
Gold River, CA



_____________________________________________________________
Click here to find experienced pros to help with your home improvement
project.
http://track.juno.com/s/lc?u=http://tagline.untd.us/fc/Ioyw6iifhPhEdynKfAH0kA
TASwamfSxoh8zu2sw6HU6TabHGhcXZ3u/


More information about the Healeys mailing list