[Healeys] '66 BJ8

[Greg Wilkinson]

Hi Dennis,
I had those same symptoms on my steering wheel. The collar for tightening
the wheel had 3 spot welds that had broken. Some had suggested using JB
weld, but I decided to drill and tap three grub screws where the original
welds were. Here are before and after photos.

-----Original Message-----
From: healeys-bounces at autox.team.net
[mailto:healeys-bounces at autox.team.net]On Behalf Of Wolfe, Dennis
Sent: Sunday, June 24, 2007 7:03 PM
To: healeys at autox.team.net
Subject: [Healeys] '66 BJ8


My adjustable steering column won't lock to any position. The ridged ring on
the steering column spins but doesn't tighten.
Consequently, the steering wheel slides  towards me or away from me as I
drive
- not a good thing.
Any suggestions?
Dennis Wolfe
1966 BJ8

This wireless message sent via Xpress Mail with GoodLink.
www.cingular.com
_______________________________________________
gregwilkinson at roadrunner.com

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

[demime 1.01d removed an attachment of type image/jpeg which had a name of CIMG1111.jpg]

[demime 1.01d removed an attachment of type image/jpeg which had a name of CIMG1114.jpg]